Empowering your tmux (status bar) experience!

including these top contributors:

tmux-powerline is a tmux tpm plugin that gives you a slick and hackable powerline status bar consisting of segments. It's easily extensible with custom segments and themes. The plugin itself is implemented purely in bash, thus minimizing system requirements. However, you can make segments in any language you want (with a shell wrapper).

Some examples of segments available that you can add to your tmux status bar are (full list here):

• LAN & WAN IP addresses
• Now Playing for MPD, Spotify (GNU/Linux native or wine, macOS), iTunes (macOS), Rhythmbox, Banshee, MOC, Audacious, Rdio (macOS), cmus, Pithos and Last.fm (last scrobbled track).
• New mail count for GMail, Maildir, mbox, mailcheck, and Apple Mail
• GNU/Linux and macOS battery status (uses richo/dotfiles/bin/battery)
• Weather in Celsius, Fahrenheit, and Kelvin using Yahoo Weather
• System load, CPU usage, and uptime
• Git, SVN, and Mercurial branch in CWD
• Date and time
• Hostname
• tmux info
• tmux mode indicator (normal/prefix, mouse, copy modes)
• CWD in pane
• Current X keyboard layout
• Network download/upload speed
• Earthquake warnings
• Claude Code subscription usage: session/weekly limits, time remaining (session/weekly/billing cycle), and optional accumulated cost

Full screenshot

left-status

Current tmux session, window, pane, hostname, and LAN & WAN IP address.

right-status

New mails, now playing, average load, weather, date, and time.

Now I've read my inbox, thus the mail segment disappears!

After pausing the music, there's no need to show the Now Playing segment anymore. Also, the weather has become much nicer!

Laptop mode: a battery segment.

dual-line status

@xx4h is helping out with developing, maintaining, and managing this project!

Requirements for the lib to work are:

• tmux -V >= 2.9
• bash --version >= 3.2 (Does not have to be your default shell.)
• Nerd Font. Follow instructions at Font Installation. However, you can use other substitute symbols as well; see config.sh.

Some segments have their own requirements. If you enable them in your theme, make sure all requirements are met for those.

• claude_code.sh: jq, curl and ccusage (only if you enable the accumulated cost display)
• cpu_temp.sh: lm_sensors for Linux, smctemp for Macos
• dropbox_status.sh: dropbox-cli
• github_notifications.sh: jq, curl
• ifstat.sh: ifstat (there is a simpler segment ifstat_sys.sh not using ifstat)
• mailcount.sh
  • gmail: wget
  • mailcheck: mailcheck
• now_playing.sh
  • mpd: libmpdclient
  • last.fm: jq, curl
• rainbarf.sh: rainbarf
• tennis.sh: jq, curl >= 7.55, and a dedicated free Live Tennis API key
• tmux_continuum*.sh: tmux-continuum
• tmux_mem_cpu_load.sh: tmux-mem-cpu-load
• wan_ip.sh: curl
• weather.sh:
  • Provider yrno: jq, curl
• xkb_layout.sh: X11, XKB

Add "tennis 24 255" to your theme's status segments and set TMUX_POWERLINE_SEG_TENNIS_API_KEY in your private configuration file. Optionally set TMUX_POWERLINE_SEG_TENNIS_PLAYER to a player or doubles-team name substring. This filter is applied locally. Protect the configuration file with chmod 600.

The segment shows the first matching live match, its set scores and available points, plus the snapshot age in minutes. TB marks tiebreak points; a tiebreak score repeated in the current set slot is shown once in brackets. [stale score] preserves the provider's staleness warning. Additional matches on this page are counted; [more] indicates that the API has another page. The segment fetches only the first 100 matches and does not paginate. An unknown score is shown as unavailable, rather than as 0-0.

This is a snapshot refreshed at most every 15 minutes. It uses only the free live matches endpoint and needs no paid plan. All instances for the same local user share one cache at ${TMUX_POWERLINE_DIR_TEMPORARY}/tennis, alongside the other segments. The fixed 900-second minimum between attempts includes failed requests, limiting the segment to 96 requests/day. When the temporary cache is missing (including after a reboot or cleanup), the segment waits a full 15 minutes before requesting a snapshot and shows Tennis: waiting for request window. Clearing the cache therefore cannot force an early update. Use a dedicated key: requests from other applications or computers also consume the key's 100/day allowance.

Network requests run in the background. If the first fetch fails the segment shows Tennis: unavailable; later failures retain the last snapshot with its age. No key means no output or network request. If a process is forcibly killed and leaves refresh.lock behind, stop the segment and remove that empty directory to resume; keep last_attempt so the budget remains intact.

Run the offline regression checks with bash tests/tennis.sh.

weather.sh refreshes in the background and shares its cache between all local tmux clients. It makes at most one GeoIP or MET Weather API attempt per configured TMUX_POWERLINE_SEG_WEATHER_UPDATE_PERIOD (600 seconds by default). Shorter, zero, negative, and invalid values cannot reduce the 600-second MET minimum. Response cache headers can defer a refresh further; failed requests use a conservative retry delay, retain the last successfully displayed weather, and leave the segment blank until the first successful refresh.

Weather data and request eligibility are stored under ${TMUX_POWERLINE_DIR_TEMPORARY}. The segment records eligibility before making a request, so a missing or unwritable local state directory suppresses requests rather than retrying for every status render. Removing local state can cause one recovery request once state can be written; it does not bypass the provider's minimum interval.

1. Install tpm and make sure it's working.

2. Install tmux-powerline as a plugin by adding a line to tmux.conf:

    set -g @plugin 'erikw/tmux-powerline'

3. Install the plugin with <prefix>I, unless you changed tpm's keybindings.

   • The default powerline should already be visible now!

4. Continue to the Configuration section below.

tmux-powerline stores the custom config, themes, and segments at $XDG_CONFIG_HOME/tmux-powerline/.

To make the following example easier, let's assume the following:

• $XDG_CONFIG_HOME has the default value of ~/.config
• tmux-powerline was installed to the XDG path ~/.config/tmux/plugins/tmux-powerline

Adapt the commands below if your paths differ from this.

Start by generating your own configuration file:

~/.config/tmux/plugins/tmux-powerline/generate_config.sh
mv ~/.config/tmux-powerline/config.sh.default ~/.config/tmux-powerline/config.sh
$EDITOR ~/.config/tmux-powerline/config.sh

Go through the default config and adjust it to your needs!

The theme is specified by setting the environment variable $TMUX_POWERLINE_THEME in the config file above. It will use a default theme, and you probably want to use your own. The default config has set the custom theme path to be ~/.config/tmux-powerline/themes/.

Make a copy of the default theme and make your own, say my-theme:

mkdir -p ~/.config/tmux-powerline/themes
cp ~/.config/tmux/plugins/tmux-powerline/themes/default.sh ~/.config/tmux-powerline/themes/my-theme.sh
$EDITOR ~/.config/tmux-powerline/themes/my-theme.sh

In the same way as themes, you can create your own segments at TMUX_POWERLINE_DIR_USER_SEGMENTS which defaults to ~/.config/tmux-powerline/segments.

To get started, copy an existing segment that is similar to the segment that you want to create.

mkdir -p ~/.config/tmux-powerline/segments
cp ~/.config/tmux/plugins/tmux-powerline/segments/date.sh ~/.config/tmux-powerline/segments/my-segment.sh
$EDITOR ~/.config/tmux-powerline/segments/my-segment.sh

Now you can add my-segment to your own theme!

Also see How to make a segment below for more details.

Some segments might not work on your system for various reasons, such as missing programs or different versions not having the same options. To find out which segment is not working, it may help to enable the debug setting in ~/.config/tmux-powerline/config.sh.

Next step would be to enable the error logging in general or even with a scope, see TMUX_POWERLINE_ERROR_LOGS_ENABLED and TMUX_POWERLINE_ERROR_LOGS_SCOPES in your config.

However, this may not be enough to determine the error, so you can inspect all executed bash commands (will be a long output) by doing

bash -x powerline.sh (left|right)

For a quick diagnostics snapshot of your local setup, run:

./doctor.sh

This prints resolved tmux-powerline paths and settings, active segment/theme configuration, and live tmux status options when a tmux server is reachable.

To debug smaller portions of code, say if you think the problem lies in a specific segment, insert these lines at the top and bottom of the relevant code portions e.g., inside a function:

set -x
exec 2>/tmp/tmux-powerline.log
<code to debug>
set +x

and then inspect the outputs like

less /tmp/tmux-powerline.log
tail -f /tmp/tmux-powerline.log # or follow output like this.

You can also enable the debug mode in your config file. Look for the TMUX_POWERLINE_DEBUG_MODE_ENABLED environment variable and set it to true.

If you can not solve the problems, you can post an issue and be sure to include relevant information about your system and script output (from ./doctor.sh and/or bash -x) and/or screenshots if needed. Be sure to search in the resolved issues section for similar problems you're experiencing before posting.

You have edited ~/.tmux.conf, but no powerline is displayed. This might be because tmux is not aware of the changes, so you have to restart your tmux session or reload that file by typing this on the command line (or in tmux command mode with prefix :)

tmux source-file ~/.tmux.conf

If your tmux looks like this, then you may have to, in iTerm, uncheck [Unicode East Asian Ambiguous characters are wide] in Preferences -> Settings -> Advanced.

This project can only gain positively from contributions. Fork today and make your own enhancements and segments to share back!

You can fork this project and then start coding right away with GitHub Codespaces, as this project is set up to install all development dependencies and install tmux-powerline on the devcontainer. See devcontainer.json and devcontainer_postCreateCommand.sh. After starting the devcontainer, just type tmux in the terminal, and you should see a working tmux-powerline already to start playing with.

./scripts/devcontainer_postCreateCommand.sh

Please section How To Make a Segment at CONTRIBUTING.md.

Create a new version of this project by using semver-cli.

vi CHANGELOG.md
semver up minor
ver=$(semver get release)
git commit -am "Bump version to $ver" && git tag $ver && git push --atomic origin main $ver

I have another tmux plugin that might interest you:

• tmux-dark-notify - A plugin that makes tmux's theme follow macOS dark/light mode.