The ESP32 is suitable to a limited extent.
It does not work on the ESP32-S2, ESP32-C3 etc
Supported codecs: wav, mp3, aac, flac, opus, vorbis
Sampling rate: 16–48 kHz
Bits per sample: 8, 16, 24, 32
Container formats: ogg, mp4, m3u8
The output sample rate can be set to a fixed value of 44.1 or 48 kHz if required by the external I²S device
Works with MAX98357A (3 Watt amplifier with DAC), connected three lines (DOUT, BLCK, LRC) to I2S. The I2S output frequency is always 48kHz, regardless of the input source, so Bluetooth devices can also be connected without any problems. For stereo are two MAX98357A necessary. AudioI2S works with UDA1334A (Adafruit I2S Stereo Decoder Breakout Board), PCM5102A and CS4344. Other HW may work but not tested. Plays also icy-streams, GoogleTTS and OpenAIspeech. Can be compiled with Arduino IDE. WIKI
#include "Arduino.h"
#include "WiFi.h"
#include "Audio.h"
// Digital I/O used
#define I2S_DOUT 25
#define I2S_BCLK 27
#define I2S_LRC 26
String ssid = "*******";
String password = "*******";
Audio audio;
// callbacks
void my_audio_info(Audio::msg_t m) {
Serial.printf("%s: %s\n", m.s, m.msg);
}
void setup() {
Audio::audio_info_callback = my_audio_info; // optional
Serial.begin(115200);
WiFi.begin(ssid.c_str(), password.c_str());
while (WiFi.status() != WL_CONNECTED) delay(1500);
audio.setPinout(I2S_BCLK, I2S_LRC, I2S_DOUT);
audio.setVolume(21); // default 0...21
audio.connecttohost("http://stream.antennethueringen.de/live/aac-64/stream.antennethueringen.de/");
}
void loop(){
audio.loop();
vTaskDelay(1);
}
You can find more examples here: https://github.com/schreibfaul1/ESP32-audioI2S/tree/master/examples
// detailed cb output
void my_audio_info(Audio::msg_t m) {
switch(m.e){
case Audio::evt_info: Serial.printf("info: ....... %s\n", m.msg); break;
case Audio::evt_eof: Serial.printf("end of file: %s\n", m.msg); break;
case Audio::evt_bitrate: Serial.printf("bitrate: .... %s\n", m.msg); break; // icy-bitrate or bitrate from metadata
case Audio::evt_icyurl: Serial.printf("icy URL: .... %s\n", m.msg); break;
case Audio::evt_id3data: Serial.printf("ID3 data: ... %s\n", m.msg); break; // id3-data or metadata
case Audio::evt_lasthost: Serial.printf("last URL: ... %s\n", m.msg); break;
case Audio::evt_name: Serial.printf("station name: %s\n", m.msg); break; // station name or icy-name
case Audio::evt_streamtitle: Serial.printf("stream title: %s\n", m.msg); break;
case Audio::evt_icylogo: Serial.printf("icy logo: ... %s\n", m.msg); break;
case Audio::evt_icydescription: Serial.printf("icy descr: .. %s\n", m.msg); break;
case Audio::evt_image: for(int i = 0; i < m.vec1.size(); i += 2){
Serial.printf("cover image: segment %02i, pos %07lu, len %05lu\n", i / 2, m.vec1[i], m.vec1[i + 1]);} break; // APIC
case Audio::evt_lyrics: Serial.printf("sync lyrics: %s\n", m.msg); break;
case Audio::evt_log : Serial.printf("audio_logs: %s\n", m.msg); break;
default: Serial.printf("message:..... %s\n", m.msg); break;
}
}Wiring
Impulse diagram
